Parts
Below you will find the more common parts required for the Seahawk range of propellers.
It should be noted that the bronze body and blades of our earlier models are prone to wear as well as the various bearings fitted. For this reason we strongly recommend return to the factory for fitting of custom bearings, as simple replacement with standard bearings will not remove all of the wear. This also allows our experience staff to inspect you propeller, set the gear backlash and recommend any necessary upgrades or additional repairs to ensure a reliable propeller for many more years.
Due to the number of models and running changes within each, it is important that you provide us with your serial number to allow us to accurately identify your propeller. On AUTOSTREAM feathering propellers this number is stamped into the hub of the propeller, either between the pitch adjusting screws or on the opposite side of the hub (two examples of serial numbers are S120637, 22R5014). On SLIPSTREAM folding propellers the serial number is stamped on the hub (E.g. S4C16).
|
|
|
|||||||||
|
|
|
|||||||||
|
|
