Seahawk - Feathering Propellers Seahawk - Folding Propellers
Home Feathering Props Folding Props VariProp Propellers Propeller Estimation Testimonials Zinc Anodes & Parts SAE Shaft Tapers Dealers Contact us
Choosing a Propeller Instructions & Old Models Trobuble shooting Dimensions Pitch estimation Common Questions Glossary/Materials The Autostream story About Seahawk Warranty Form

To order your spare parts please phone,email or fax your order
We do not have a online store.

Below you will find the more common parts required for the Seahawk range of propellers.

It should be noted that the bronze body and blades of our earlier models are prone to wear as well as the various bearings fitted. For this reason we strongly recommend return to the factory for fitting of custom bearings, as simple replacement with standard bearings will not remove all of the wear. This also allows our experience staff to inspect you propeller, set the gear backlash and recommend any necessary upgrades or additional repairs to ensure a reliable propeller for many more years.

Due to the number of models and running changes within each, it is important that you provide us with your serial number to allow us to accurately identify your propeller. On AUTOSTREAM feathering propellers this number is stamped into the hub of the propeller, either between the pitch adjusting screws or on the opposite side of the hub (two examples of serial numbers are S120637, 22R5014). On SLIPSTREAM folding propellers the serial number is stamped on the hub (E.g. S4C16).

Zinc Anodes
 
3kg Express post bag $20
500 gram Express post bag $15

Zinc Anodes should be replaced when down to approx 25% of original size.
Dimensions are approximate only.
The base diameter is the widest part of the Zinc Anode.
Tube length is the length of the stainless steel core tube.
Body length is the length from the tip to the base of the widest part, excluding any internal or external step.
S1 ZINC ANODE 420 grams $35
Fits stainless steel Autostream Feathering Propellers of the S1/S2 Series.
Weight = 420 grams
Body length
38mm / 1.5 inches
Tube Length:
38mm / 1.5 inches
Base Diameter:
59mm / 2.3 inches
Mobil XHP 222 Grease 397 grams $10
Mobil XHP 222 Grease

This grease is suitable for all Seahawk Autostream feathering propellers
3000 ZINC ANODE 760 grams $36.30
3000/4000 Series $36.30
Weight = 760 grams
Body length:
63mm / 2.5 inches
Tube Length:
63mm / 2.5 inches
Base Diameter:
62mm / 2.5 inches
2000 ZINC ANODE LATE 520 grams $36.30
Later 2000 Series $36.30
Weight = 520 grams
Body length: NOTE TUBE LENGTH
62mm / 2.5 inches
Tube Length:
60mm / 2.4 inches
Base Diameter:
60mm / 2.4 inches
2000 ZINC ANODE EARLY $36.30
Original 2 blade & Early 2000 Series
Body length:
63mm / 2.5 inches
Tube Length: NOTE TUBE LENGTH
67mm / 2.6 inches
Base Diameter:
56mm / 2.2 inches
NO LONGER AVAILABLE
USE: 2000 ZINC ANODE LATE
1000.ZINC.ANODE 820 grams $36.30
1000 Series $36.30
Weight = 820 grams
Body length:
76mm / 3 inches
Tube Length:
60mm / 2.4 inches
Base Diameter:
71mm / 2.8 inches
5000.ZINC.ANODE $55.94
5000 Series $55.94
Body length:
92mm / 3.6 inches
Tube Length:
106mm / 4.2 inches
Base Diameter:
88mm / 3.5 inches
NO LONGER AVAILABLE
USE: 6000.ZINC.ANODE
6000.ZINC.ANODE $55.94 1.7kg
6000 Series $55.94
Weight = 1.7 Kg
Body length:
91mm / 3.6 inches
Tube Length:
91mm / 3.6 inches
Base Diameter:
88mm / 3.5 inches
S1.GREASE.TUBE $20.90
Stainless Steel Grease Tube
Suits S1 and S2 Stainless Steel Autostream Feathering Propellers
S1.ANODE.NUT $4.13
Nyloc Nut 3/8" UNF
Holds Zinc Anode to Propeller
Suits All Autostream feathering propellers except 2 Blade Bronze types
S4 2 Blade Folding Propeller Service Kit $143
This kit contains all the parts needed to renew a S4 2 blade folding propeller
Can also be used to renew a S6 2 blade saildrive propeller if the rubber cushion and bushes are not needed
S6 SailDrive 2 Blade Folding Propeller Service Kit $192.50
This kit contains all the parts needed to renew a S6 2 blade saildrive propeller including the rubber cushion and bushes.
If you do not needed the rubber cushion and bushes then use a S4 Service Kit.
S5 3 Blade Folding Propeller Service Kit $198
This kit contains all the parts needed to renew a S5 3 blade folding shaft drive propeller.
It can also be used to renew a S7 3 blade folding saildrive propeller if the rubber cushion and bushes are not needed.
S7 SailDrive 3 Blade Folding Propeller Service Kit $253
This kit contains all the parts needed to renew a S7 3 blade saildrive folding propeller including the rubber cushion and bushes.
If the rubber cushion and bushes are not needed then use a S5 Service Kit.